A TruePane company - serving Mesquite, NV

Entry Doors in Mesquite, NV

Entry doorsEntry doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate
Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Entry Doors in Mesquite, NV

An entry door replacement in Mesquite typically runs $1,400 to $4,200 installed, depending on the material, the size of the opening, and whether we’re swapping the slab alone or the whole frame. That’s the short answer. The longer answer is that a front door in this valley has to hold up against sun that fades a cheap finish in two summers and heat that swells wood against its stop by July. We install entry doors built for that reality, and we stand behind every one of them in writing.

TruePane Windows & Doors Mesquite handles entry doors as part of our broader Door Installation work, and it’s the job we get called back about most often, usually by a neighbor who watched us set one across the street. Call (833) 620-7092 and a live person answers, day or night. Our technicians have up to 18 years of experience, and most single-door jobs are finished in one visit.

Why Entry Doors in Mesquite Fail Faster Than Anywhere Else

Mesquite sits at roughly 1,600 feet in the Virgin River valley, and the summer swing from a 110-degree afternoon to a 70-degree night works a door harder than most homeowners realize. Wood slabs move. Cheap steel skins dent and the factory paint chalks. We regularly see door bottoms in Sun City Mesquite that have swelled against the threshold and now scrape every morning from June through September. That’s not a hinge problem. It’s a moisture and heat problem, and a new slab on the old frame won’t fix it.

We quote entry doors the way we quote windows: manufacturer lines side by side on paper, both warranty layers registered in writing before we leave. It’s part of how we work, and it’s why homeowners who’ve been burned once tend to call us twice.

When You Need Entry Doors

  • The door binds or scrapes from May through September. In Mesquite’s heat, a wood door that fits perfectly in February will drag on the threshold by July. If you’re lifting the knob to close it, the slab or the frame has moved, and a new entry door is usually less expensive than a string of patch jobs.
  • The finish is failing. When the factory paint or stain on a west-facing front door starts to chalk or peel, moisture is getting into the wood or the steel skin. Repainting a failing door in this climate buys you a season or two at best.
  • The seal or weatherstripping is gone. A dollar bill should drag when you close the door on it. If it slides out freely, you’re paying to cool the desert. We see this constantly on original doors in older homes off Mesquite Boulevard.
  • You can see daylight around the frame. Light at the corners or along the strike side means air and dust are getting in too. On an older home, it’s often the frame that has racked, not the door.
  • The door is original to a 1990s or early-2000s build. Builders in this valley used hollow-core or thin steel slabs on many front entries. They’ve done their service, and the glass in them isn’t impact-rated for the wind events we get.
  • You want impact-rated glass or better security hardware. A front door with single-pane glass is the weak point in an otherwise solid house. Impact-rated entry doors from lines like PGT and CGI are built for exactly that.

Our Entry Doors Process

  1. We measure the opening twice. Our technicians measure the rough opening, the frame, and the slab, then measure again. A door that’s a quarter inch off in Mesquite’s heat will tell you about it every summer for the next fifteen years.
  2. We quote lines side by side on paper. You’ll see manufacturer options from brands like ViewLux and CGI next to each other, with pricing, glass ratings, and warranty durations stated plainly. No surprise line items on the final bill.
  3. We set and shim the frame true. Plumb, level, and square, with the threshold pitched so water sheds away from the house. This is the part nobody sees and the part that decides whether the door still closes easily in ten years.
  4. We seal and finish. Proper flashing at the head, sealant at the frame, and a finish that will hold up to our sun. If the door needs paint or stain, we tell you which products actually last here.
  5. We register both warranty layers before we leave. That’s The Keystone Standard: manufacturer warranty and workmanship coverage, both documented in writing, durations stated, no paperwork left hanging.
  6. We back it with the 90-Day Done Right Promise. If something isn’t right in the first 90 days, we make it right. No arguing, no fine print fight.

Learn more about the full scope of what we install on our Door Installation in Mesquite page.

Entry Doors Pricing in Mesquite

Honest ranges for entry door work in this valley. Every job is quoted upfront and in writing before we touch the opening.

Job Typical Range
Slab replacement (existing frame, standard steel or fiberglass) $1,400 – $2,300
Pre-hung entry door, standard size, with hardware $2,200 – $3,400
Impact-rated entry door (PGT, CGI class) $3,200 – $5,500
Custom or oversized entry with sidelights $4,500 – $8,000
Frame repair or re-framing before install $400 – $1,200 additional

A few things move the number. Glass area and impact rating matter a lot. So does whether the old frame is sound; on older Mesquite homes we sometimes find rot at the threshold that has to be repaired before the new door goes in. Hardware like multi-point locks and upgraded handlesets adds cost but is worth it on a front entry. We also honor a permanent 5% discount for seniors and veterans, plus $50 off any repair over $250.

The estimate is free, and a live person answers (833) 620-7092 any hour. We’ll be there when we say we will.

FAQs – Entry Doors

How much does an entry door cost in Mesquite, NV?

A standard pre-hung entry door installed in Mesquite runs $2,200 to $3,400, while a slab replacement on an existing sound frame typically lands between $1,400 and $2,300. Impact-rated doors run higher, usually $3,200 to $5,500 depending on size and glass. Call (833) 620-7092 for an exact written quote on your specific opening; the estimate is free.

Can you install an entry door in a single visit?

Yes, most standard entry door replacements in Mesquite are completed in one visit. Our technicians measure twice, set the frame true, finish the seal, and register both warranty layers before leaving. If the frame needs repair or the opening is custom, we’ll tell you upfront what the timeline looks like before we start.

Should I replace just the door slab or the whole door?

Replace the whole door, frame included, if the existing frame is out of square or the threshold has rotted; a new slab on a bad frame will bind again within a season in our heat. If the frame is solid and true, a slab replacement is often the better value. We measure and inspect before quoting either way.

Do you register the manufacturer warranty?

Yes, both layers. Under The Keystone Standard, we register the manufacturer warranty and document our workmanship coverage in writing, with durations stated, before the truck leaves the driveway. If you’ve been left with a voided warranty before, that’s the part we fix.

What brands of entry doors do you install?

We’re an authorized installer for more than a dozen lines, including ViewLux, PGT, and CGI for entry doors, plus Andersen, Pella, Marvin, Milgard, Jeld-Wen, and ES Windows across our door and window work. We quote them side by side on paper so you see exactly what you’re buying.

For a related project, see our work in nearby window installation and entry door repair, or learn about impact windows if you’re upgrading the whole envelope. We also help homeowners in Henderson and St. George, and offer sliding door installation and patio door replacement for backyard entries.

A note on security hardware.

If you’re upgrading to a reinforced strike plate or multi-point lock, we’ll install hardware rated for the door material we’re setting. A deadbolt is only as strong as the frame behind it, and on older Mesquite homes we sometimes find the strike side needs blocking before the new hardware will hold.

Get a Written Quote on Your Entry Door

If your front door is binding, failing, or original to a 1990s build, it’s time to replace it. We’ll measure twice, quote it plainly, and stand behind the install. Call (833) 620-7092 any hour for a free estimate, and we’ll schedule your install with the same crew from start to finish. A square deal, upfront pricing, and a door that still closes true when the next hot summer rolls around.

Written by the team at TruePane Windows & Doors Mesquite, serving Mesquite.

Need Windows & Doors help in Mesquite? Licensed & insured · free written estimates
Call (833) 620-7092
Local Service Coverage

Request a Free Estimate in Mesquite

Tell us what you need - TruePane Windows & Doors Mesquite responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch