Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTrusted Sliding & Patio Doors for Mesquite Homeowners
If your patio door sticks in July, lets the desert heat through the glass, or takes two hands and a hip check to slide shut, it’s time to have it looked at. In Mesquite’s climate, a sliding door that binds in summer is usually telling you the rollers have flattened or the track has shifted, not that the whole unit is finished. Our technicians have up to 18 years of experience setting, replacing, and servicing sliding and patio doors in this valley, and we measure every opening twice before a single panel comes out. We answer the phone with a live person 24 hours a day, 7 days a week, and most jobs are done in a single visit. Call (833) 620-7092 to schedule your free estimate.

What Our Sliding & Patio Doors Service Includes
Sliding and patio doors are a category of work we take seriously because they’re asked to do more than any other door in the house: open and close hundreds of times a season, seal against heat and wind, and carry the glass weight of a full-sized panel without sagging. Here’s what the work looks like under each service we offer in Mesquite.
Patio Doors
A patio door is the sliding or hinged exterior door that opens to a yard, patio, or covered porch. You need one serviced or replaced when it no longer seals, when the frame has moved enough that the glass sits out of square, or when the threshold has worn so water pools against the sill during summer monsoon storms. We handle repair, replacement, and full unit installation for patio doors in Mesquite, and we check the opening’s framing and sill pitch before we quote so the new door is set to drain correctly.
Impact Sliding Glass Doors
Impact sliding glass doors are built with laminated or reinforced glazing rated to resist wind-borne debris, and they matter here where high-wind events and blowing sand push against every exterior opening. You need them when your current slider was never rated for impact, when you’re replacing a failed panel, or when a builder-grade unit is showing stress cracks at the glass edge. We install impact-rated sliding glass doors and register both manufacturer warranty layers in writing before we leave, so the performance rating you paid for stays documented.
Sliding Glass Door Replacement
Replacement is the right call when the existing slider has a broken seal, fogged glass between the panes, a bent track, or a frame that’s pulled away from the wall. You’ll know it’s replacement rather than repair when the glass itself is frosted or the track can’t be straightened. We replace sliding glass doors in Mesquite with full measurement of the rough opening, side-by-side manufacturer quotes on paper, and a finished install that doesn’t leave the threshold fighting the screen.
Impact French Patio Doors
Impact French patio doors are hinged double doors, usually swinging out to the patio, built with the same impact-rated glazing as an impact slider. You need them when you want the look of French doors without giving up wind resistance, or when an older French unit has sagged and stopped latching cleanly. We install impact French patio doors and check hinge geometry and latch alignment on every job, because a French door that doesn’t meet its strike plate is a door that leaks air and rattles in wind.
Screen Door Installation
A screen door on a sliding system protects the opening while letting air through, and it’s the piece that takes the abuse of daily use and pets. You need a new one when the screen frame is bent, the mesh is torn, or the rollers have worn flat enough that it jumps its track. We install screen doors to fit the existing track and adjust the roller height so the screen glides at the same effort as the main panel.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Brands We Service for Sliding & Patio Doors
We’re an authorized installer for more than a dozen manufacturer lines, and on the sliding and patio side that includes PGT and CGI, both of which build impact-rated systems suited to Southern Nevada’s wind exposure. PGT sliders have a specific roller and track profile, and we know where those units wear first: the lower rollers flatten and the track picks up grit long before the glass is ever a problem. CGI makes a solid impact door, and we’ve set enough of them to know how their frames behave in this heat, particularly how much expansion clearance the track needs in a Mesquite summer.
We also work with ViewLux and CWS on patio and sliding units where the homeowner wants a specific glazing or frame finish, and we quote those lines side by side on paper so you see the differences in writing rather than hearing them described. If you have an older slider from any of these makers and it’s binding, fogged, or simply done, we can assess it honestly rather than pushing you toward replacement. Whether you have PGT or any other make, we can help – and we’ll tell you plainly when a repair is the better square deal.
Signs You Need Sliding & Patio Doors Right Now
Most homeowners wait too long on a patio door because it still technically opens. Here’s what to watch for, and why each one matters.
- The door binds or takes two hands to slide. A door that sticks in summer and frees up in winter is telling you the rollers or track are worn, and the extra force you’re using works the frame loose over time. Left alone, a binding slider can crack a glass panel at the corner.
- Fog or condensation between the panes. Fog between the glass means the sealed unit’s barrier has failed, and the insulating value you paid for is gone. It also means the glass can no longer resist heat the way it was rated to, and replacement of the sealed unit is the only real fix.
- Daylight or draft around the frame. If you can see light at the jamb or feel hot air pushing in on a July afternoon, the seal has failed and the door is letting conditioned air escape. In Mesquite that shows up on your power bill before it shows up on the door.
- The screen jumps its track or the mesh is torn. A screen that won’t stay in its track lets insects and blowing sand into the house, and a bent screen frame can scratch the main panel’s track. It’s a small fix that protects a bigger one.
- The door no longer latches or locks cleanly. A slider that won’t seat in its lock means the panels are out of alignment or the frame has shifted, and an unlatched exterior door is an opening that doesn’t hold. This is worth a look sooner rather than later.
Our Sliding & Patio Doors Process – Step by Step
Every job follows the same steps, whether it’s a screen door or a full impact slider replacement. Here’s how it runs.

- 1
Free estimate and on-site measurement. We come out, measure the rough opening twice, and check the sill pitch, framing, and track condition before we quote. You get a written, line-item estimate with manufacturer options side by side on paper.
- 2
Manufacturer selection and written quote. We walk you through the lines that fit your opening and your wind rating, and you choose before any deposit changes hands. Both warranty layers are spelled out with their durations in writing at this stage, so there’s no fine print later.
- 3
Permits and scheduling. Where a permit is required for exterior door replacement, we pull it and schedule the inspection. You get a firm day and window, and our uniformed, background-checked technicians show up when we said we would.
- 4
Removal and installation. We protect the interior, remove the old unit, and set the new door plumb and square, sealing the threshold and flashing so the door drains the way it should. Our technicians have up to 18 years of experience setting doors in this climate, and it shows in the sill detail.
- 5
Final walkthrough and warranty registration. We slide the door open and closed with you, check the lock and screen, and register both manufacturer warranty layers in writing before the truck leaves the driveway. The 90-Day Done Right Promise covers the workmanship, and if something isn’t right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Sliding & Patio Doors Cost in Mesquite?
A typical screen door installation in Mesquite runs $150-$350 depending on size and track condition. Sliding glass door replacement for a standard-sized unit usually runs $1,800-$4,500 installed, and impact-rated sliding glass doors run $2,800-$6,500 depending on the panel count, glazing, and frame. Impact French patio doors generally run $3,200-$7,000 for a double unit. These ranges reflect what we actually quote in this valley, where heat and wind exposure push door selection toward impact-rated glazing more often than in milder markets.
What moves the price: the opening size and whether the framing needs repair, the wind rating of the glazing, frame material (vinyl, aluminum, or wood-clad), panel count, and whether a permit or inspection is required. You avoid overpaying by getting the line-item quote in writing and comparing manufacturer lines side by side, which we do as standard practice. A free estimate from us includes measurement, the written quote, and both warranty layers stated with their durations – no change orders, no surprise line items on the bill.
Sliding & Patio Doors Near Mesquite – Our Service Area
We serve Mesquite and the surrounding communities, including Bunkerville, Moapa Valley, and Moapa Town. Mesquite jobs are typically scheduled within a few days of your estimate, and we coordinate the trip for our outlying neighbors so you’re not waiting on a second visit. If you’re in Bunkerville or Moapa Valley, see our Sliding & Patio Doors in Bunkerville and Sliding & Patio Doors in Moapa Valley pages for local scheduling details, or start with our Sliding & Patio Doors in Mesquite overview and call us directly.
Serving Mesquite, NV – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Sliding & Patio Doors in Mesquite
Sliding and patio door service covers repair, replacement, and installation of exterior sliding and hinged patio doors, including impact-rated units and screen doors. That means fixing a binding track or worn roller, replacing a fogged sealed unit, or setting a whole new door in the opening. We handle all of it in Mesquite, with a written estimate before any work starts.
Most single-panel sliding door replacements are completed in one visit, typically a few hours once the unit is on site. Impact French patio doors or larger openings that need framing repair can run into a second day. We give you a firm timeline with your written estimate, and most of our jobs are done in a single visit. Call (833) 620-7092 and we’ll tell you exactly what your door needs.
Sliding glass door replacement in Mesquite typically runs $1,800-$4,500 installed for a standard unit, and impact-rated sliders run $2,800-$6,500 depending on glazing and panel count. Screen door installation is $150-$350. The exact number depends on your opening, the wind rating, and the frame material, which is why we measure on site. Call (833) 620-7092 for a free, line-item estimate in writing.
Yes, we service and install PGT sliding doors, along with CGI, ViewLux, and CWS units. We know where each line wears first, from the roller profile to the track expansion clearance this heat demands. Whether your door needs new rollers, a sealed unit, or a full replacement, we can assess it honestly. Call (833) 620-7092 to schedule.
Yes. A stuck or unlatched patio door is one of the most common calls we get in Mesquite, especially in summer when heat expansion tightens the track. The cause is usually worn rollers, a shifted frame, or a track packed with grit, and we diagnose it on site before recommending a fix. Call (833) 620-7092 and we’ll schedule a look.
Every job is covered by The Keystone Standard and the 90-Day Done Right Promise. That means both manufacturer warranty layers are registered in writing with their durations stated before the truck leaves the driveway, and our workmanship is guaranteed for 90 days. If something isn’t right, we make it right. Call (833) 620-7092 with questions about coverage on your specific door.
Clear the area on both sides of the door and remove window coverings and any furniture within a few feet of the opening. We protect the interior and handle the removal and disposal, so you don’t need to move the old door yourself. If pets or kids are in the house, plan for them to be away from the work area for a few hours. Call (833) 620-7092 and we’ll walk you through the rest before the day of the job.
Schedule Your Sliding & Patio Doors Service in Mesquite Today
If your patio door is binding, fogged, or past its useful life, the sooner it’s looked at, the better the square deal. Call (833) 620-7092 for a free, no-obligation estimate in Mesquite. A live person answers every call, 24 hours a day, 7 days a week. We measure twice, quote in writing, and stand behind the work. Call today and let’s get it done right.
Written by the team at TruePane Windows & Doors.