Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Sliding & Patio Doors: The Mesquite Owner’s Guide
We install and service Therma-Tru-compatible sliding and patio doors for Mesquite homeowners, and a full panel replacement with new glass and hardware typically runs $1,400 to $4,200 depending on size, glass package and frame condition. Rolling hardware, rollers, tracks, weatherstrip and lock sets are handled on a separate service schedule, and most repair work gets scheduled on a single visit. Homeowners around Mesquite usually discover the failure the same way. The door drags at the bottom in July, then rattles in the wind in January. The screen drags, the lock won’t engage, or the panel won’t sit flush in the jamb after a hot summer. That’s usually not one failed part. It’s a system telling you the rollers, seals and track have worn together.
Which Therma-Tru Models This Applies To
Therma-Tru builds sliding and patio door systems under its Fiber-Classic, Smooth-Star, Pulse, and related product lines. The part you need is determined by the model series and the opening size, not by the year the door was installed. If your door has a Therma-Tru sticker or a stamp on the frame, look there first. On a sliding panel, the model code is usually on the outer edge or on the glass spacer. If the label is gone, we measure the rough opening, panel height, roller channel width and track depth, then match it against the Therma-Tru part catalog for your series.
The OEM-versus-aftermarket decision matters here. Therma-Tru factory rollers and lock sets match the original dimensions exactly, but they can be slower to source and cost more. Quality aftermarket equivalents (roller wheels, weatherstrip, sweeps, handles) fit the same track and stop dimensions and often hold up as well in a dry, hot climate – provided the size and profile are correct. The catch is that most aftermarket parts sold online are sized for another brand’s track. A roller that’s off by 1/16 inch will bind, and a weatherstrip that doesn’t match the Therma-Tru kerf width will peel off by August. We quote both options on paper so you see the difference.
TruePane Windows & Doors Mesquite is an independent service provider. We are not affiliated with Therma-Tru, though we’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and CWS.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your Therma-Tru Sliding & Patio Doors Is Failing
- The panel binds or drags along the bottom track. Worn or seized rollers are the usual cause, and in Mesquite the culprit is dust and grit that embeds in the roller bearings after a summer of open-door living.
- The lock won’t latch, or the handle feels loose. A slipping mortise or the strike plate out of alignment from seasonal expansion. Hot-month movement of the jamb is enough to throw the hardware out of true.
- Water weeps in at the sill or the corners. Failed weatherstrip or a worn sill sweep lets wind-driven rain past the seal. In the high-desert monsoon weeks, that’s the first thing we find.
- Daylight shows through the frame or the door rattles in wind. The weatherstrip has compressed or pulled out of its kerf, so the panel no longer seals against the jamb.
- The glass has fogged or the seal between panes is cloudy. Seal failure in a dual-pane unit. That’s not a hardware issue; it’s a glass replacement or panel replacement decision, and it affects both energy performance and appearance.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Mesquite installation, expect a typical breakdown like this:
| Work | Installed range |
|---|---|
| Roller replacement (both panels) | $180 – $340 |
| Track and sweep replacement | $220 – $420 |
| Lock set and handle replacement | $150 – $290 |
| Weatherstrip and sill seal replacement | $160 – $320 |
| Full panel replacement (size and glass dependent) | $1,400 – $4,200 |
Those prices cover parts, labor and haul-away. What moves the number is the model series, panel size, the glass package you choose, and whether the track has been scored by years of sliding on a seized roller. Every job is quoted upfront as a written line item, and we stand behind it with the 90-Day Done Right Promise, backed by The Keystone Standard: both manufacturer warranty layers registered in writing before the truck leaves the driveway. No surprise line items. No arguing about what’s covered.
DIY or Call Us?
You can safely check a few things on your own. Confirm the label and model code. Measure the panel and track. Wipe the bearing surfaces of the track clean. Look for a bent roller, a compressed weatherstrip, or visible water damage at the sill. That’s the easy part.
Where it goes wrong is the removal. A sliding panel of that size and weight comes off its track with a small misalignment and will not want to go back on easily. It can come down on fingers, or on the glass, and a shattered panel is a much larger bill than the original repair. Track and sill repairs often need the opening re-squared, which fastens to the surrounding frame. That’s when the fix becomes a two-person job with clamps and a level, not an afternoon project. Nothing on this page is a safety hazard in the way a garage door spring is, but a sliding panel is heavy and not forgiving. If the door is binding or the glass is fogged, call (833) 620-7092 and we’ll schedule a free estimate.
FAQs
Rollers and weatherstrip typically last 8 to 12 years in the Mesquite climate, and locks and handles often go 12 to 15 years. The dry heat and wind-blown dust shorten roller life more than anything else, so clean the track and the bearings twice a year to get the full range. Call (833) 620-7092 for a free estimate on a replacement.
Yes, in most cases. If the failure is the roller, lock, weatherstrip or sill sweep, a targeted repair costs far less than a full panel replacement and restores the door to proper operation. If the glass has fogged or the frame has water damage or rot, replacement is usually the better call. Call (833) 620-7092 and we’ll be honest about which one you’re facing.
A roller or hardware repair is usually done in a single visit, often in two to three hours. A full panel replacement for a Mesquite home usually takes most of a day, and we confirm the schedule at the estimate so you’re not left waiting on a second appointment. Call (833) 620-7092 to get on the schedule.
We source parts by the Therma-Tru model series and measurements, not by a photo. Once we’ve confirmed the model code and measured the opening, we pull the correct part from the catalogs we order against and quote both the OEM and quality aftermarket options on paper. We don’t claim to stock parts or carry them on a truck; we order to the door. Call (833) 620-7092 for a free estimate.
If your Therma-Tru door is failing, the call is free and the quote is on paper. Reach out to TruePane Windows & Doors Mesquite at (833) 620-7092, and we’ll be there when we say.
Written by the team at TruePane Windows & Doors Mesquite, serving Mesquite and nearby areas.