Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Impact Windows & Doors in Mesquite: What to Know First
We provide independent Therma-Tru impact windows & doors in Mesquite, and most single-opening replacements are measured, quoted in writing, and installed in one visit. A full-house impact package takes longer because each opening is sized and ordered separately. We’re not the cheapest bid you’ll get on Therma-Tru impact work, and we don’t try to be. Our quotes are line-item and fixed, so the number you sign is the number you pay.
This page is for the homeowner whose Therma-Tru door or window has been in the wall for fifteen or twenty years and is now being asked to do something it was never spec’d for – hold up to desert wind-driven debris, or match a new impact-rated system on the other side of the house. It’s also for the owner buying new Therma-Tru impact product and wanting it set true the first time. Call (833) 620-7092 and a live person answers, day or night.
How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru is best known for fiberglass and steel entry doors and door systems, and the failures we see in Mesquite are particular to that construction and this climate. None of them are mysterious once you’ve opened a few hundred of them.
- Fiberglass door slabs that swell at the bottom rail and bind in July. On Therma-Tru Fiber-Classic and Smooth-Star slabs, moisture wicking into an unprotected bottom edge shows up as a door that drags from June through September, then frees up in fall. The slab itself is usually fine; the real cause is a failed bottom sweep or a threshold that isn’t shedding water. We pull the slab, dry and seal the edge per Therma-Tru’s finishing spec, replace the sweep and threshold, and rehang so the reveal is even top to bottom.
- Impact glazing that loses its seal and fogs at the perimeter. On Therma-Tru impact-rated door lites and sidelites, a fogged unit almost always traces to a compromised glazing seal or a frame that has racked slightly in the heat. Mesquite’s swing from cold nights to 110-degree afternoons works that seal harder than a coastal install ever would. We replace the insulating unit with an impact-rated lite that matches the original spec rather than downgrading it.
- Multipoint and mortise hardware that misaligns after settling. Therma-Tru door systems with multipoint locking develop a handle that won’t throw fully once the frame shifts a fraction. Owners often hear “the lock is bad” from someone who never checked the frame. We check plumb and square first, then adjust the strike and hinge side before touching hardware. Nine times in ten the hardware was never the problem.
- Weatherstrip and sill gaskets baked brittle by dry heat. The kerf weatherstrip and sill gaskets on Therma-Tru doors dry out and crumble in Mesquite’s single-digit humidity faster than in most of the country. That’s the source of the dust and the whistle at the threshold. We replace with OEM-profile weatherstrip so the door seals the way it was designed to, not with a generic strip that fits loosely.
- Impact windows that were never actually impact-rated, sold as though they were. We’re called out to Therma-Tru windows that a prior owner believed were impact-rated and aren’t. The label on the glass tells the truth. If it isn’t rated, we say so plainly and quote a rated replacement; we won’t tell you a standard unit is something it isn’t.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Therma-Tru Impact Windows & Doors Process
- 1
The call. A live person answers, takes the details, and books a time we’ll actually keep. No callback form, no phone tree.
- 2
Measure twice, on site. A background-checked, uniformed technician measures every opening twice and photographs the existing Therma-Tru unit, frame condition, and threshold.
- 3
The parts decision, on paper. We quote OEM Therma-Tru parts and quality aftermarket equivalents side by side so you see the trade-off in dollars. On warranty-sensitive components we recommend OEM to keep the manufacturer coverage intact.
- 4
The install or repair. Frame set plumb and square, flashing and sealant done to spec, impact lites installed to the rated assembly. Most single-opening jobs finish in one visit.
- 5
The test. We operate the door or window through its full travel, check the lock throw, and confirm the seal with the door closed and latched before we call it done.
- 6
The paperwork. Both manufacturer warranty layers registered in writing, durations stated, before we leave the driveway. Then cleanup, and the 90-Day Done Right Promise behind the work.
What Therma-Tru Impact Windows & Doors Costs in Mesquite
These are the ranges we quote most often in Mesquite. Your exact number depends on the opening, the product line, and what we find behind the frame.
| Job | Typical range |
|---|---|
| Therma-Tru entry door repair (sweep, threshold, weatherstrip, rehang) | $180 – $450 |
| Impact-rated door lite or sidelite replacement | $350 – $900 |
| Single Therma-Tru impact window replacement | $600 – $1,400 |
| Therma-Tru impact entry door system, installed | $2,800 – $6,500 |
| Full-house impact window package | Quoted per opening |
What moves the price: opening size, whether the frame is sound or needs rebuild, OEM versus aftermarket parts, and whether the assembly must meet impact rating. We quote line by line and fixed. Call (833) 620-7092 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Mesquite Homeowners Call TruePane Windows & Doors Mesquite for Therma-Tru Work
We answer the phone with a live person 24 hours a day, and we show up when we said we would. Our technicians have up to 18 years of experience, and every one is background-checked and uniformed. Every job carries the 90-Day Done Right Promise and The Keystone Standard: both warranty layers registered in writing before we leave.
We’re an independent Therma-Tru service provider, not affiliated with or authorized by Therma-Tru, and we’re an authorized installer for more than a dozen lines including PGT, CGI, CWS, and ES Windows. If a Therma-Tru part is on backorder, we can quote a comparable impact system from those lines so your project isn’t held hostage. The founding rule still governs every install: if the pane is not true, the job is not done.
FAQs
It can, if non-OEM parts or an unqualified installer are used. Therma-Tru’s coverage is specific about approved components, which is why we quote OEM parts on warranty-sensitive work and register both warranty layers in writing before we leave. Call (833) 620-7092 and we’ll walk you through what your coverage allows.
Yes – most common Therma-Tru parts, including sweeps, thresholds, weatherstrip, and impact lites, are available to us. Some specialty components take longer to source, which is where our multi-brand lines help. Call for current lead times on your specific part.
Repair if the slab and frame are sound and the problem is hardware, seal, or threshold. Replace if the slab is water-damaged at the bottom rail, the frame is out of square, or you need a rating the existing unit doesn’t have. We tell you which one it is after we’ve looked, not before. Call (833) 620-7092 for a free estimate.
Most single-opening installs finish in one visit; a full-house impact package is scheduled across multiple days. We give you the schedule up front and stick to it. Call for a realistic timeline on your home.
No. We quote line by line and fixed, and we don’t add surprise line items. If we find something behind the frame that changes the scope, we stop and quote it in writing before proceeding. Call (833) 620-7092 for a free estimate.
Get Your Free Therma-Tru Impact Estimate in Mesquite
If your Therma-Tru door or window isn’t doing its job, or you’re planning a new impact-rated system for your Mesquite home, the next step is simple. Call (833) 620-7092 for a free estimate. A live person answers around the clock, we measure every opening twice, and we put the quote and both warranty registrations in writing. We stand behind the work, and we’ll be there when we say.
Written by the team at TruePane Windows & Doors Mesquite, serving Mesquite and nearby areas.