Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Impact Garage Doors: The Mesquite Owner’s Guide
We install and service CGI impact garage doors for Mesquite homeowners, and a full door replacement typically runs $2,400 to $6,800 installed depending on door size, glazing, and hardware. Most replacements are scheduled within a few business days rather than same-day, because impact doors are built to order for your opening. Owners usually figure out the door is failing when the tracks start to bind in July heat, when a panel shows spider-cracking around the hinges, or when the door stops sealing tightly and the garage turns into an oven by mid-morning.
Which CGI Models This Applies To
CGI makes impact-rated garage doors across several product lines, and the part you need depends on which series is on your opening. The door’s model and series are stamped on a label inside the jamb or on the door’s inner stile. Write down the full string, including the size code. CGI’s impact doors are built in common widths from 8 to 18 feet, and a door built for a 16-foot opening won’t accept parts sized for a 9-foot single. That size mismatch is the most common compatibility gotcha we see in Mesquite: a homeowner orders rollers or a bottom seal for the series but the wrong width, and the part won’t seat.
CGI’s impact doors use heavier-gauge track and reinforced hinges to carry the added panel weight, so standard non-impact hardware often won’t fit. For OEM versus aftermarket, genuine CGI parts match the original fit exactly and keep the impact rating documentation intact, which matters if you ever need to show the door met the code on your home. Quality aftermarket equivalents (rollers, hinges, seals, springs rated to the door’s weight) work fine and cost less, but the part has to match the door’s weight and series, not just the brand. We quote both options on paper so you can see the difference.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CGI Impact Garage Doors Is Failing
- The door binds or jerks on the way up. Worn rollers, a bent track, or a hinge that’s pulled loose under the heavier impact panel weight. In Mesquite, summer heat expands the metal track and makes a marginal alignment worse.
- Spider-cracking or crazing in a panel or glazing. Impact glazing is laminated, so a crack stays in place instead of shattering, but once it’s cracked the panel has lost its rating and needs replacing.
- The bottom seal is torn, flattened, or missing. Heat and sun dry out the rubber, and a bad seal lets dust and hot air into the garage. This is one of the cheapest fixes and one of the most ignored.
- The door won’t stay up, or drops when you let go. A spring that’s lost tension or is near the end of its life. Springs are rated for a set number of cycles, and a door used twice a day hits that limit sooner than most owners expect.
- The door won’t close flush or the opener strains. A track out of plumb, a hinge binding, or the opener fighting a door that’s no longer balanced. Left alone, the opener motor burns out next.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Mesquite homeowners typically pay, parts and labor together:
- Rollers and hinges (full set): $150 to $320
- Bottom seal replacement: $90 to $180
- Spring replacement (per door): $180 to $340
- Track section or reinforcement: $140 to $400
- Full impact door replacement: $2,400 to $6,800 installed
What drives the range is door size, whether the part is OEM or a quality aftermarket equivalent, and how much of the hardware needs replacing at once. We give you a written line-item quote before any work starts, so the bill matches the estimate with no surprise line items. Every job carries our 90-Day Done Right Promise, backed by The Keystone Standard: we register both warranty layers in writing, durations stated, before we leave.
DIY or Call Us?
You can safely check a few things yourself: look for the model label, sweep a flashlight along the track for bends, press the bottom seal to see if it’s hardened, and open the door by hand to feel if it binds. What you should not touch is the torsion spring or the cables under tension. Those store enough force to cause serious injury, and a spring that lets go while you’re working on it can break a hand or worse. Impact doors carry more weight than standard doors, so the springs hold more tension than most homeowners realize.
Replacing rollers or a bottom seal is within reach for a careful owner. Balancing a door, replacing a spring, and re-aligning impact-rated track is not. If you’re not sure which part is failing, call us at (833) 620-7092 and we’ll tell you straight.
FAQs
How long do CGI impact garage door parts last in Mesquite? Rollers and seals usually last 5 to 8 years here, while torsion springs last 8 to 12 years depending on how often the door runs. Mesquite’s heat and dust dry out rubber seals faster than in cooler climates, so seals often go before the springs do. Call (833) 620-7092 for a free estimate on whatever’s failing.
Can the part be repaired instead of replaced? Sometimes yes. A bent track section can often be straightened or replaced without a full door swap, and a single cracked hinge is a quick fix. Once impact glazing is cracked, though, the panel has to be replaced to keep the door’s rating. Call (833) 620-7092 and we’ll tell you which way makes sense.
How long does the swap take? A spring, roller, or seal replacement is usually done in one visit, often under two hours. A full impact door replacement is a half-day to full-day job, and the door is built to order first. Call (833) 620-7092 to schedule your free estimate.
How do you source the CGI part? We order through CGI’s authorized supply chain using your door’s model and size label, and we can offer a quality aftermarket equivalent when it saves you money without compromising fit. We quote both on paper so you see exactly what you’re buying. Call (833) 620-7092 for a free estimate.
TruePane Windows & Doors Mesquite is an independent service provider and is not affiliated with CGI. We also service PGT, CWS, and ES Windows impact products.
If your CGI impact garage door is binding, sealing poorly, or a part has failed, call TruePane Windows & Doors Mesquite at (833) 620-7092 for a free estimate. We’ll check the door, name the failing part, quote OEM and aftermarket side by side, and tell you honestly whether it’s a repair or a replacement. A live person answers the phone 24 hours a day, 7 days a week. Our technicians have up to 18 years of experience, and every job is covered by the 90-Day Done Right Promise.
Written by the team at TruePane Windows & Doors Mesquite, serving Mesquite and nearby areas.