A TruePane company - serving Mesquite, NV

CGI Door Installation in Mesquite, NV

Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

CGI Door Installation: The Mesquite Owner’s Guide

Door installation on a CGI door in Mesquite typically runs $850 to $2,400 installed for a standard entry or patio replacement, and we measure every opening before we quote so the number holds. We confirm the exact CGI series against your door label or opening dimensions before ordering. Most Mesquite jobs are completed in a single visit once the door and hardware are on site.

Call (833) 620-7092

Owners usually discover a problem slowly. The door starts dragging on the threshold by June. The latch lines up one month and misses the strike plate the next. On a CGI product the failure is almost never the slab itself – it’s the hinge prep, the frame, the sill pan, or the seal that has gone flat in the desert heat. We’re an independent service provider. TruePane installs and services CGI doors but is not affiliated with CGI.

Which CGI Models This Applies To

CGI makes a wide spread of aluminum, vinyl, and impact-rated door lines, and the part that fits a 3000 series sliding glass door will not fit a residential entry or a garden door frame. The first thing to find is the label – CGI stamps the series and size on the frame head or jamb, and that sticker is the fastest way to match the right replacement. If the label is sun-bleached or gone, we take a set of frame measurements and cross-check against the rough opening.

The Mesquite gotcha: CGI impact-rated door frames use a heavier sill channel and a deeper glazing pocket than the standard residential line. An off-the-shelf sill pan or weatherstrip kit sized for a standard frame will look right, install easily, and leak in the first hard rain. That is a compatibility mismatch, not a bad part.

On the OEM-versus-aftermarket decision, we only recommend aftermarket where the spec matches – a quality aftermarket sweep or hinge is fine when the dimensions and material are right, but under warranty it usually pays to keep the OEM part in place. We put the options on paper side by side so you can see exactly what is being used and why.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Signs Your CGI Door Installation Is Failing

  • Door dragging on the threshold by summer. The slab has expanded or a hinge has loosened in the jamb. In Mesquite heat, a hinge screw that pulls out of soft aluminum is common and often just re-prepped.
  • Latch missing the strike plate. The frame has shifted or the slab is out of square. Left alone, this grinds the latch and ruins the hardware.
  • Water staining inside the sill. The sill pan or sweep has failed and rain is getting behind the frame. This is the one that does real damage fast.
  • Weatherstrip cracked or flattened. UV exposure in southern Nevada ages the seals quickly. Flattened seals let in dust and drive up your cooling bill.
  • Glass fogged inside the sealed unit. The seal on the insulating glass has failed. That’s a glazing replacement, not a door-adjustment fix.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Mesquite, plan on these installed ranges. Frame and prep repair, hinge re-prepping, and weatherstrip or sweep replacement typically run $180 to $420 depending on how much has to be rebuilt. A full door replacement with a CGI-compatible unit installed runs $850 to $2,400 for a standard entry or patio size. Heavy impact-rated or custom sizes cost more.

Scope Typical installed range
Hardware, hinge re-prep, sweep/weatherstrip $180 – $420
Sill pan / threshold rebuild $300 – $700
Insulating glass replacement $280 – $650
Full door replacement $850 – $2,400

The number is driven by door size, whether the frame is sound, and how much prep has to be redone. We quote parts and labor separately so you see what you’re paying for. Every job is covered by the 90-Day Done Right Promise, and we register both manufacturer warranty layers in writing before we leave.

DIY or Call Us?

Adjusting a hinge, checking that the sweep sits flat, and cleaning the track are all fine to handle yourself. Where DIY goes wrong is resetting a frame out of square or replacing a sill pan – those are the jobs that get a door that looked okay into a real leak, and once water gets behind the frame the repair gets bigger. If you see water staining or the door won’t latch, stop and let a trained technician look at it.

Our technicians have up to 18 years of experience, and we measure every opening before quoting. Call (833) 620-7092 and a live person answers day or night, so you can schedule a free estimate and get a straight answer.

FAQs

Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (833) 620-7092
Local Service Coverage

Request a Free Estimate in Mesquite

Tell us what you need - TruePane Windows & Doors Mesquite responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch